PDA

Visualizza Versione Completa : Laser Xtreme por Sprint ST 1050



joggele
04/09/2008, 14:18
Hello Triple driver,

at last week I modificate the stock exhaust from my Sprint. I found, the Laser Xtreme looks very good for this model, so I obtain this exhaust.

The result:

before: 120 PS at 9.400 1/min. and 97,7 at 7.970 1/min
after: 128 PS at 9.100 1/min. 109,5 Nm at 7.378 1/min.


Okay, there are additional some parts: BMC Airfilter and PowerCommander :fisch:

The sound is harder and dry, if you know what I mean. The exhaust is from our german TÜV accept :papa:


Picture says more then words ....

http://www.sprinter-forum.net/photoplog/images/2/large/2_P1010003_k.jpg

http://www.sprinter-forum.net/photoplog/images/2/large/1_IMG_2262_k.jpg

http://www.sprinter-forum.net/photoplog/images/2/large/1_IMG_2307_k.jpg

http://www.sprinter-forum.net/photoplog/images/2/large/1_IMG_2290_k.jpg

http://www.sprinter-forum.net/photoplog/images/2/large/1_P1010024_k.jpg

http://www.sprinter-forum.net/photoplog/images/2/large/1_P1010021_k.jpg

http://www.sprinter-forum.net/photoplog/images/2/large/1_IMG_2279_k.jpg

http://www.sprinter-forum.net/photoplog/images/2/large/1_IMG_2329_k.jpg

http://www.sprinter-forum.net/photoplog/images/2/large/1_IMG_2334_k.jpg

You found the power-diagram here: KLICK (http://sprinter-forum.net/attachment.php?attachmentid=3305&d=1219740550)


Regards
Jürgen

stradamax
04/09/2008, 14:40
W la Germania dove 'ste modifiche risultano + tollerate!

reg156k1
04/09/2008, 23:33
nice modifications

who is the manufacturer of the plate holder, where did you buy it?

joggele
05/09/2008, 08:36
Hi reg156k1,

the placeholder is designed by me :fisch:

You can buy this part only in the sprinter-forum. Here is the thread: Opa macht wieder KZH's - sprinter-forum.net - das Triumph Sprint Portal (http://sprinter-forum.net/showthread.php?t=5621) and the order form you can find here: Bestellung Kennzeichenhalter - sprinter-forum.net - das Triumph Sprint Portal (http://www.sprinter-forum.net/newthread.php?do=kzh)


regards
Jürgen

orcablu
05/09/2008, 09:07
it's my dream come true...

I asked some year ago at omniaracing , but in italy for sprint the extreme series was not disposable :cry:
omnia will arrange the exaust system with a model for ninja kawasaki...


listen... but the exaust have a db killer? and how much dB prouduce it?

naturally it's not catalyzed...it's true? :biggrin3:

i'm not speak deucth...

there are some site in english...

thank you

Diabolico_Vendicatore
05/09/2008, 09:48
Orca, ricorda che devi inserire anche un sottocodone... la marmitta originale faceva anche da sottocoda, con quella in questione invece tutta la m...a che raccoglie la ruota te la spara sotto la sella e sui contatti elettrici...

orcablu
05/09/2008, 10:00
quello scarico val bene un sotto coda... o un parafango posteriore ;-)

devo solo capire dove comprarlo...lo scarico ovviamente

joggele
05/09/2008, 10:29
Hi orcablue,

the exhaust is from the ZX-6R :rolleyes:. We modify the exhaust to the Sprint.

It needs
- a tube between the exhaust and the stock tube (picture 4 and 5)
- a new holder for the plateholder (picture 6)
- new holder for the exhaust mount (picture 3)

There are dB-Killer. But you can these easy remove and insert the sports :rolleyes:

dB-Eater:
http://www.sprinter-forum.net/photoplog/images/2/1_legitim2.jpg

http://www.sprinter-forum.net/photoplog/images/2/large/1_legitim1.jpg

Sport:
http://www.sprinter-forum.net/photoplog/images/2/large/1_sport2.jpg

If you want, you can only cnange the middle dB-Killer, or the left and the right, or ...


regards
Jürgen

Diabolico_Vendicatore
05/09/2008, 11:34
Orca, ma decisamente a me pare + estetico l'originale...

orcablu
05/09/2008, 15:40
Orca, ma decisamente a me pare + estetico l'originale...


ma che stai a di... vabbè a te piace più il grigio del blu :tongue:

e comunque è la stessa modifica che mi voleva fare omnia racing...:blink:

invece andreani mi ha risposto che per ora nisba il laser per sprint st originale...nisba :mad:



@ jurgen: but if I change db-killer to sport i need ti remap the power commander?

joggele
05/09/2008, 16:50
Hi,

you need, if you want the safe way, three maps:
- Stock exhaust (I think you have it now)
- Custom exhaust (dB-Killer map)
- Custom exhaust (sport map)

Anyway, if you only want to test from time to time the sport, you need no sport map.

You can your Lady tune with the sport. If you change to dB-Killer, You only have a little bit less PS.

If you tune with dB-Killer and then change to sport, the danger is, that the engine is to grow. That's not good :wacko:

If you change only the middle dB-Eater (after tune with dB-Killer), then you want only the dB-Killer map. This means Bernd from BDPerformance (KLICK (http://www.bdperformance.de))


regards
Jürgen

orcablu
06/09/2008, 08:36
many thanks,

plaese send by Pm your e-mail contact, because now the budget for the LADY it's empty, ma next year, maybe...

yours it's good job...many compliments

joggele
08/09/2008, 07:29
THX for the flowers ...


regards Jürgen