Link utili: TCP: il sito Italiano più importante dedicato alle motociclette Triumph
Segui TCP su:
Benvenuto su Triumphchepassione, il Forum Triumph più attivo d' Italia!
Sei nuovo del Forum? LEGGI IL REGOLAMENTO e PRESENTATI in questa sezione. Non sai usare il Forum? Ecco una semplice GUIDA.
mille grazzie
Hi, After downloading, a reset of the adaption is required. Process will be launched in the test window (Reset Adaption). <Menu> ECU--- Reset Adaption After each download, a Adaption reset is needed. 1. Turn the ignition off and back on again. 2. Wait 10 seconds and turn the ignition off again. 3. Turn the ignition on. Wait until TuneECU has connected automatically and select Reset Adaption from the ECU menu. 4. Start the engine and let it idle until the TPS light in the status bar becomes green – around 10 to 15 minutes, sometimes it may take a little longer until the TPS Indicator is green, at this process, don't touch the throttle. Would be as a base-map for a vote on a dynamometer, the 20465 or 20466 Suitable, depending on which fuel is available in your area. BR, Tom
Hi spadino, For the Zard Exhaust, we have no map, The only solution is a vote on a dynamometer. As a basis for a vote, could work one of the Arrow-lo-boy maps. Is your Bike with or without ABS? Their following question, unfortunately I have not understood: ...how do I disconnect the computer from the bata bike or do I do the other procedure Best regards, Tom
Hi spadino, sorry, please write in english. Best regards, Tom
Visualizza Messaggi
