[TuneECU] rimappare la centralina motore della tua Triumph da soli e gratis: DOMANDE e RISPOSTE

Visualizzazione Stampabile

03/09/2011, 09:39
SPETTRO

Thanks,everything cheked and done.

thanks again
03/09/2011, 15:58
la mela verde

ciao TOM che tu sappia c'è una specie di bug in tune ecu per il quale non viene rilevato il valore "accensione"
ho fatto varie prove, a volte rileva la prima e la terza ma non la seconda, ora solo seconda e terza
ragazzi capita anche a voi? potete fare una prova alle vostre street triple?
grazie mille
ho anche fatto sentire la moto da wasteels e warsteiner e il motore gira a 3 cilindri
bo???????
posto dei video dove si sente il motore

Hello Tom you know there's some sort of bug in ECU tune for which the value is not found "power"
I did various tests, sometimes detects the first and third but not the second, now only the second and third
happen to you guys? You can test your street triple?
thank you very much
I also did feel the bike and Wasteels warsteiner and the engine is running 3-cylinder
bo ???????
instead of the video where you hear the engine

http://img197.imageshack.us/img197/8...1809mod.th.jpg

Uploaded with ImageShack.us

MAH00167 - YouTube
05/09/2011, 17:52
Tom_Hamburg

Hi "la mela verde"

Happens it with the current version 1.9.9 well?

If so, please send an e-mail to Alain, he is the programmer.
Use for the contact to Alain, the contact form: Kontakt_Alain

BR, Tom

addendum:
What maps are affected and what is your VIN?
05/09/2011, 20:32
la mela verde

Citazione:

Originariamente Scritto da Tom_Hamburg

Hi "la mela verde"

Happens it with the current version 1.9.9 well?

If so, please send an e-mail to Alain, he is the programmer.
Use for the contact to Alain, the contact form: Kontakt_Alain

BR, Tom

addendum:
What maps are affected and what is your VIN?

Street Triple 675 Up to VIN # 411983 Keihin ECU

map 20261 675 Street Triple with Arrow slip on exhaust
but i have a LEOVINCE'S spli on exhaust
05/09/2011, 22:23
tigerozzo

secondo me è meglio fare così, poi vedete voi!
http://www.forumtriumphchepassione.c...ecialista.html
06/09/2011, 11:39
Tom_Hamburg

Do you have this problem with the current version 1.9.9 also?

Can not it be more likely that you have a problem with the harness or the ignition coil?

BR, Tom

Citazione:

Originariamente Scritto da la mela verde

Street Triple 675 Up to VIN # 411983 Keihin ECU

map 20261 675 Street Triple with Arrow slip on exhaust
but i have a LEOVINCE'S spli on exhaust
06/09/2011, 12:13
la mela verde

Citazione:

Originariamente Scritto da Tom_Hamburg

Do you have this problem with the current version 1.9.9 also?

Can not it be more likely that you have a problem with the harness or the ignition coil?

BR, Tom

I do not know what to say, the bike is not the 3-cylinder 2
noticing how can I without the use of ECU tune?
06/09/2011, 16:42
Tom_Hamburg

Hi,

I think you should send an e-mail to Alain, maybe he can help you.

BR, Tom

Citazione:

Originariamente Scritto da la mela verde

I do not know what to say, the bike is not the 3-cylinder 2
noticing how can I without the use of ECU tune?
09/09/2011, 00:12
HARRRRRRRRRR

Citazione:

Originariamente Scritto da Tom_Hamburg

Hi,

For your configuration I can only recommend the dynamometer.

BR, Tom

I booked a dyno tuning today. Since the tech only has pc3 software, is it possible to convert a tuneecu hex file into a pc3 table?

When the pc3 table will be ready, I will import it into TuneEcu. Will I have any problems with adaption reset?
09/09/2011, 11:00
Tom_Hamburg

Hi,

Easily the finished PC III map with TuneECU import and save.
Now load the new map on the ECU, and finally reset the adaptation.
Then driving and be happy.

BR, Tom