- Twin top tubes to one 55mms conified. This is why of the Y!
- Centered shock tank (piggy back) with adjustable progressive high velocity compression damping
- New titanium shock spring available - New extra brilliant “walnut shell” surface finishing
- Handcrafted, entirely made in Italy, 7005/7075 Aluminium frame
- Perimetral twin top tube design, gives added torsional stiffness for more precise handling and rapid cornering.
- Swing arm clamp for 12 mm hub axel
- Swing arm pivot point positioned 5mm higher to increase antisquat effect
- Swing arm hanging plates with tubing of the frame in an even more baricentrum centred positioned
- Harder springs now available
- Increased pedaling and antisquat stability while maintaining a very high reactivity of the suspensions
- Increased handling and manageability due to the new positioning of the frame tubing and even more torsional rigidity
- Single Pivot design,very stiff, triangulated swing arm that has anticipated since 1998, the same pull reversed triangulated structure that only recently has been applied to the lately GP winning motos
- Ancillotti progressive, hermetically sealed, Pull Shock superlight linkage system, allows for the the lowest and most centered positioning of the mass, for superior handling and stability
Advanced single swing arm pivot point to obtain more linear rear wheel curve, and more pedaling reactivity, with the advantages and simplicity of the single pivot point.
- Ancillotti shock with boosted capacity ,diameter and new piston port design, customized for the owner’s specific weight
- Pull Shock linkage set up with more progressive rate and 9,5 inches travel at the rear wheel
- Weight of the frameset 4.2 kg
TECH SPECIFICS
FORK HANDLEBARS
Marzocchi 888 Rc3 Evo V2 Ancillotti tuned
Renthal Fatbar 770mm
HEADSET TAPE / GRIPS
1 1/8” Threadless, Ancillotti red alloy cups, cartridge bearings, w/alloy bolt
Campabros lock on
STEM FRONT BREAKE
Renthal Duo Stem 50mm
Formula Oval piston 203 mm
REAR DERAILLEUR REAR BRAKE
Sram x.9 short cage 9v
Formula Oval piston 203 mm
SHIFT LEVERS CASSETTE
Sram x.9 trigger 9v
Sram 11-26 9v
CHAIN CRANKSET
Sram PC971
Truvativ Descendant 165mm
CHAINDEVICE CHAIN RING
Ancillotti specifical lexan CNC plate
Ancillotti DH 36 tooths black/silver
RIMS FRONT HUB
Mavic EX 721 black 32 holes
Ancillotti 7075 CNC racing hub
REAR HUB SPOKES
Nuke proof generator 12 mm troughtaxel
DT swiss Revolution 2.0-1.8-2.0 silver
FRONT TIRE REAR TIRE
Maxxis Minion DHF 2ply 26 x 2.50 super tacky 42a
Maxxis High Roller DH 2ply 26 x 2.50 super tacky 42a
SADDLE SEAT POST
San Marco Aspide racing team
Ritchey Pro v2 30.9 black
SEAT BINDER ...
Alloy collar 34.9mm clamp black
Scusate la lungaggine ma quando c'è vò, c'è vò !
Rispondo anche a sua eminenza: col cavolo che ci sarà una distribuzione di Bultaco. Almeno non i miei
Originariamente Scritto da Grigio
piume delle mie piume. Adesso per farmi star tranquillo, ha smesso il motocross e fà il campionato europeo di Downhill. Lo stronzo 
ma a piedi sino al Col del Lys è lunga 
