


Interessante, comunque TuneECU sul suo sito dice chiaramente che, per poter lavorare con le centraline Triumph tramite Bluetooth, ha bisogno di un adattatore ScanTool:
"Attention:
For the Triumph models, which can be reprogrammed via Bluetooth only, special Bluetooth-adapters
like the "OBDLink LX" or the "OBDLink MX" or MX+ or "UniCarScan UCSI-2100" have to be used"
Poi, alcuni modelli di Triumph permettono anche la connessione via cavo USB; per quelli è raccomandato l'uso di un cavo USB OBD2 di un certo tipo:
"
- Cable USB OBD2 KKL FTDI (The cable is the same as the windows version)
Info: FTDI chips which have been proven to work if the cable is of good quality:
- Chip type: FT232R, Vendor ID: 0x0403, Product ID: 0x6001
- Chip type: FT232 / 245BM, Vendor ID: 0x0403, Product ID: 0x6001
- And from TuneBoy the USB cable with Chip Type: FT232R, Vendor ID: 0x0403, Product ID: 0xBF40
- FTDI chips with Vendor ID 1027 also fit.
- Adapter USB/micro (cable OTG) if needed."
Io ho diversi adattatori OBD2 Bluetooth non-ScanTool, che funzionano correttamente con i vari software delle mie auto (Jeep e Seat) e nessuno di essi funziona con le mie Triiumph.
Inoltre ho un cavo FTDI232 che funziona correttamente con la mia Jeep, ma non funziona con le mie Triumph, perché usa un protocollo diverso.
Insomma è un ginepraio e conviene seguire pedissequamente le istruzioni di TuneECU.
Ultima modifica di XFer; 02/08/2023 alle 15:13 Motivo: Unione Post Automatica
Chi va piano, arriva dopo.